guidetocaraudio.com

Image source: www.car-audio-uk.blogspot.com
There are two main types in the stereo universe namely Sound Quality and Sound Pressure Level.

Sound Quality refers to just that — a very linear response that’s not boomed and is very controlled, especially when listening to complex songs.

An SQ System generally uses a smaller woofer and requires a smaller enclosure. A sealed enclosure would typically work best for this application.

Sealed enclosures are also known as “Acoustic Suspension” enclosures. When a speaker is placed in a sealed enclosure, the pressure becomes trapped in the box and restricts the cone movement, so the air inside the enclosure acts as a spring. The smaller the enclosure, the more pressure is exerted against the cone under movement.

The real advantage is that they just consume less space, not to mention they’re easier to design and construct. Choosing a sealed enclosure will give you clean and accurate bass with good low-end extension.

(Cont…)

It has Exceptional Liner excursion capability and highly optimized motor and suspension designs to ensure linear performance at high power levels.

For Car Audio Speakers use Pioneer TS-E2096 because it has 3 way speakers with grills, KEVLAR brand composite cone woofer with butyl rubber edge, pure magnesium balanced dome midrange with neodymium magnet and maximum power of 360watt with nominal input power of 90 watt.

I think that’s enough because I will guarantee you with the brand and quality of that car audio parts you will have the best audio.

Image Source: www.gumija.lv

(Cont…)

PIONEER DEH-P6000UB has a maximum power output of MOSFET 50Wx4 with AM/FM radio and Plays CD-R, CD-RW, MP3, WMA, WAV, and AAC formats. It has Aux-in at rear, Ipod Direct Control, USB Input, IP Bus, RCA Pre-out, Sub-display Output, Hard-wired Remote Input, and Direct Sub Drive.

For Car Audio Amplifier use Boss Blade Extreme BLX4000 – Amplifier – 2-CHANNEL because it has 2-channel high-current MOSFET bridgeable power amplifier with remote subwoofer level control which will allow you to control the sound in your car.

For Car Audio Subwoofer use JL Audio 12W6v2 Car Audio subwoofer because it gives high output and audiophile sub-bass quality in compact enclosures.

(to be continued…)

Image Source:www.thefind.com

Having a car is a great factor especially for us guys because it adds “Pogi Points Factor”, But its not only the car that matters, it includes best body kits and paints, great engine, and of course the blasting sounds that is giving pleasure to anyone who hears it. But what is the best car audio I need to make that booming sounds? Actually there are many different variations of speakers, amplifiers, players, and sub woofer you can use for your car. And what if will suggest you are for me the best.

For Car Audio Player use PIONEER DEH-P6000UB because its a CD Tuner with IPOD Direct Control, USB-IN and 2 RCA pre-Outs. So that even where you store your music you can still play at your car any time any where.

TO be Continued…

Image source: www.avtoindex.com

(cont…)

These tricks don’t work perfectly all the time and probably won’t win any SQ competitions but, for a daily driver, they offer better imaging without hours of testing.
The build process is pretty simple and requires very little tools. If you have access to an air compressor, a DA sander and a die-grinder, they’ll be your best friend, and allow you to save time when shaping and sanding parts. If not, you can always do it the old-fashioned way and sand by hand. If you must hand sand, don’t wait until the body filler is fully cured. Instead, let it go the stage in which the filler is just beyond rubber. If you start your rough shaping now, the filler will roll-off quickly and easily, letting you get the shape you want faster and with less fatigue.
All these idea were loudly explained by team 4kas audio.

Image Source: www.jeffssite.com

Before any actual mods can begin, the speakers should be imaged. This is a lengthy process that involves listening tests and aiming the speakers, but with a couple of shortcuts, the results can be pretty amazing. One of the best tricks for quick imaging is to aim the driver’s-side midrange at the passenger’s left ear and the passenger’s-side speaker, at the driver’s right ear. This will create a cross point in the center of the vehicle, equalizing the path lengths as much as possible without relocating the speakers. If you’re using components, try aiming the tweeter at the rearview mirror or a centered point 3-4′ in front of the passenger’s head. This creates a separation that allows both waves to hit the listener’s ears at nearly the same time.

To be continued…

Image Source: www.team4kasaudio.multiply.com

Creating a quality audio system requires more than just good speakers. In order to create a well-balanced soundstage, the speakers need proper placement-not always an easy task when dealing with the tight spaces of modern cars. Many times audio teams relegate themselves to modifying the factory placements for better imaging. One way to do this is building new door panels, which is a pretty complicated endeavor. There are, however, more simple methods of achieving this goal.
Depending on the vehicle, there are options using factory panels or grilles. But for modern cars, they use the factory door speaker grilles as a base for their pods. By modifying the factory panels, they can change the directional imaging of the speakers, creating a well-balanced soundstage. The one above is a great sample of a modern cars’ speaker pod.

Image Source: www.team4kasaudio.multiply.com

When it comes to car audio, you have to wonder, is it all for the sake of enjoying the music or simply to get the attention? Consider your car passing along a heavy street of people, with your radio tuned up to the higher volumes, you will surely get some attention. It is in these cases that people, especially the teenagers, are simply showing off and seeking attention.

You will see a lot of these people as teenagers. They demand for attention. As far as enjoying the quality is concerned, clarity is important than noise. Besides, those loud bass sounds may eventually rip your speaker apart!

When the time comes you are considering placing a subwoofer to your car, chances are you want more bass to support your sound quality as far as bass requirements are concerned. Most people today want that vibrating and loud booming sound so that they can be able to enjoy the full beat of their music wherever they may go.

One brand that has been standing out above the rest is Polk Audio. If you talk about a reliable brand that has many sound trippers going crazy, then Polk Audio is it. So when you consider installing a subwoofer, check out the specs rather than the price for what you are getting.